Palmer Monicon®, and the volume is right!

With Palmer Monicon®, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon® is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.


Palmer Passiv Monitor Controller

13 anmeldelser

616 kr. (inkl. moms)

Prismatch
Bestillingsvare: Leveringstid 5-8 arbejdsdage
Afhent på lager 0,-
GLS - pakkeshop 59,-
GLS - Erhvervslevering 59,-
GLS - hjemmelevering 99,-
Danske fragtmænd* 299,-
Levering fra 59,-  Se leveringsmuligheder
  • Volume kontrol til dine aktive monitors
  • 2 x jack/XLR combo indgang
  • 1 x 3.5 mm Stereo-jack indgang
  • 2 x XLR udgang
  • 1 x 3.5 mm stereo jack udgang
  • Mute knap


Palmer Monicon®, and the volume is right!

With Palmer Monicon®, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon® is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.



Varenr.: ADA-PMONICON
EAN: 4049521156564
Vægt (kg.) 1

Specifications

 

Product type

Other Studio and Recording Equipment


Channels

1


Inputs

2


Input connectors

3.5 mm TRS , XLR


Input type

balanced/unbalanced (depending on TS/TRS connection)


Max. input level

20 dBu


Input impedance

(balanced) 10k Ohm(s) , (unbalanced) 5k Ohm(s)


Outputs

2


Output connectors

3.5 mm TRS , XLR


Output type

balanced/unbalanced (depending on TS/TRS connection)


Max. output level

20 dBu


Output impedance

600 Ohm(s)


Frequency response

10 - 40000 Hz


THD

0.001 %


Max. attenuation

(Attenuator + Mute) 112 dB , (Attenuator) 85 dB


Controls

attenuation , mono , mute


Cabinet material

sheet steel , wood


Cabinet surface

Powder coated


Width

164 mm


Height

62 mm


Depth

85 mm


Weight

0,75 kg


/upload_dir/templates/SSXL2024_oktober_speedy