Cameo SB 6 Dual DMX Splitter

Ingen bedømmelse

Cameo SB 6 DUAL

6-channel DMX splitter / booster (3-pin and 5-pin)

The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.

 

Features

  • Professional 6-way DMX splitter / booster
  • Chassis 1U 19" rack-mount enclosure
  • 6 electrically isolated XLR (3-pin / 5-pin) outputs
  • DMX status indicator per channel
  • Power status indicator
  • Switchable 120 Ohm terminating resistor for the DMX THRU output jack
  • Front and rear rack-mount angle attachment options

1.190 kr.

Billigst på PriceRunner
Vi prismatcher i
Tilbehør der passer til
Afhent på lager 0,-
GLS - pakkeshop 59,-
GLS - Erhvervslevering 59,-
GLS - hjemmelevering 99,-
Danske fragtmænd* 299,-

Læs mere om levering

Tilbehør der passer til

Vi tilbyder attraktiv leasing
5-stjernet Kundeservice

Cameo SB 6 DUAL

6-channel DMX splitter / booster (3-pin and 5-pin)

The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.

 

Features

  • Professional 6-way DMX splitter / booster
  • Chassis 1U 19" rack-mount enclosure
  • 6 electrically isolated XLR (3-pin / 5-pin) outputs
  • DMX status indicator per channel
  • Power status indicator
  • Switchable 120 Ohm terminating resistor for the DMX THRU output jack
  • Front and rear rack-mount angle attachment options
Varenr.: CAM-CLSB6D
EAN: 4049521198373
Vægt (kg.) 3
Product number: CLSB6D
Product type: DMX splitter / booster
Type: DMX 512 protocol
DMX inputs: 2 (parallel)
DMX input connectors: XLR 3-pin male, XLR 5-pin male
DMX Thru Outputs: 2 (parallel)
DMX Thru Output Connectors: XLR 5-pin female, XLR 3-pin female
DMX outputs: 6
DMX output connectors: XLR 5-pin male, XLR 3-pin male
Controls: Power On/Off, DMX Thru Terminator
Indicators: 6 x Power LED, 6 x Signal LED
Mains connector: IEC power connector
Operating voltage: transformer, 230 V AC, 50 Hz
Power consumption: 15W
Width: 483mm
Height: 44mm
Depth: 160mm
Weight: 3kg
Accessories (included): Power cord